Research Publications (Food Safety)

This research deals with a highly efficient, selective, low-cost, and recyclable adsorbent for the fast removal of lead (Pb)(II) ions from aqueous solutions, and an investigation of the related adsorption mechanisms. Three types of materials were prepared from pea peels waste using simple, energy-efficient and environmentally friendly treatment.

In this paper, we report leaching of precious and scattered metals such as gold (Au), copper (Cu), nickel (Ni), zinc (Zn), iron (Fe), and lead (Pb) from printed circuit boards of scrap mobile phones by hydrometallurgical process using inorganic acid, organic acid and base. The amount of metals leached by different leachants are quantified using atomic absorption spectroscopy.

Separation of arsenic and valuable metals (Pb, Zn, Cu, Bi, Sn, In, Ag, Sb, etc.) is a core problem for effective utilization of high arsenic-containing copper smelting ashes (HACSA). This study developed an effective separation process of arsenic, lead, and zinc from HACSA via alkali leaching followed by sulfide precipitation.

This work examines polycyclic aromatic hydrocarbon (PAH) concentrations in yard trash at various stages of the yard trash management cycle of collection, stockpiling, grinding and screening into mulch, and composting. Total extractable PAH concentrations were measured in yard trash at various management stages from 10 locations in Florida. The concentrations of 16 PAH compounds in processed yard trash ranged from 0.38 to 14 mg kg-1.

Industrial waste management generated by different petrochemical complexes at Pars Special Economic Energy Zone, located in the south of Iran, was investigated. All 10 active petrochemical complexes were visited and generated wastes were identified by a checklist. Petrochemical plants were classified regarding feeds, process, and products and nine representative wastes were sampled.

This mini-review reports curbing waste shells (i.e. seashells, eggshells, snail shells, etc.), environmental health issues and liabilities by using them as material for heterogenous catalysts, blended cement manufacture, concrete aggregate, ceramics and plastics additives, biofilter medium and biomedical applications.

Advanced thermal treatment of electronic waste offers advantages of volume reduction and energy recovery. In this work, the pyrolysis behaviour of nonmetallic fractions of waste printed circuit boards was studied. The fate of a bromine and thermal decomposition pathway of nonmetallic fractions of waste printed circuit boards were further probed.

In this study, the ability of H. illucens larvae (black soldier fly (BSF)) to metabolise different semisolid biowastes (e.g. kitchen waste, animal manure) has been applied to the treatment of landfill leachate.

Carcass waste recycling exerts an important influence on preventing epidemic diseases, improving the ecological environment, and promoting sustainable development of the livestock industry although it has rarely aroused widespread attention throughout the world.

The use of accelerated carbonation technology in combination with a granulation process was employed to produce aggregates from a variety of industrial wastes, which included municipal solid waste incineration fly ash and air pollution control residue, oil shale ash, cement kiln dust, and quarry fines that have been produced in Estonia.

Agglomeration that occurs during municipal sewage sludge (MSS) fluidized bed co-combustion might affect heavy metal distribution and the transformation of bottom ash. A study on the mobility and speciation of heavy metals that accompanies agglomeration behavior and phosphorus addition should be examined during MSS co-combustion.

This research investigated the heavy metal leaching property and cementitious material preparation by treating municipal solid waste incineration fly ash through the molten salt process. The results indicated that the heavy metal thermal evaporation of fly ash in the molten salt was related to molten salt composition, heat treatment temperature and atmosphere.

Spent lead paste is the main component in lead-acid batteries reaching end of life. It contains about 55% lead sulphate and 35% lead dioxide, as well as minor amounts of lead oxide. It is necessary to recycle spent lead paste with minimal pollution and low energy consumption instead of the conventional smelting method.